|
Canada-QC-CHAMBORD 公司名錄
|
公司新聞:
- Standard - Xcel Energy
The “Xcel Energy Standard for Electric Installation and Use” is a valuable timesaving publication that will help to determine the necessary requirements for customers’ wiring intended to be connected to the Company’s distribution system
- Milbank - Find Quality Metering Products from Milbank
Milbank's CT rated sockets, transockets, enclosures and test switches provide the flexibility and safety needed for metering in commercial and industrial applications Read about our new line of bussed CT cabinets
- 1008793CH | Eaton meter socket | Eaton
Eaton meter socket, Comm, 320A, Over under, 5x5 inch hub open, 3 8 inch stud, 5-jaw, 1-phase, 3 8 inch stud, Lever bypass, 3-wire, Ringless, 600 Vac
- American Midwest Power | Commercial Multi-Tenant Metering
Available up to 480V (1 phase or 3 phase) with 100 KA fault current rating with 10KA limit at meter socket; Xcel Energy Approved; Top or Bottom Feed design available Main switches available
- Effective Date: March 1, 2008 - Xcel Energy
Single-phase and three-phase meter sockets shall be rated for either 200 or 320 amp continuous duty and shall be equipped with an approved lever-actuated locking-jaw bypass constructed such that the bypass lever cannot be in the bypass position with the socket cover installed
- Milbank - CT Cabinets, Termination Cabinets, and Disconnect Combos
Milbank is pleased to announce high-amperage Current Transformer (CT) cabinet additions to our product portfolio These bussed cabinets range from 400 to 3000 Amps To install in conjunction with CT cabinets, Milbank also offers a range of CT meter sockets Learn more about all our metering products
- B-Line metering resources - Eaton
Meter mounting equipment for CenterPoint Energy, AEP, Xcel Energy, Entergy, Ameren Catalog - CA307007EN
- Construction and Meter Install - Xcel Energy
Prior to scheduling of your meter installation, an approved Inspection Certification must be sent to Xcel Energy at BCLCO@xcelenergy com If you have additional questions or comments regarding construction and meter installation, please call us Have a question or concern? We are here to help Be prepared for your installation
- Milbank U4801-XL-5T9 | J. H. Larson Company
Milbank U4801-XL-5T9 1-Position Meter Socket, 600 VAC, 200 A, 1 ph Phase, NEMA 3R Enclosure
- ELECTRIC SERVICE CONVERSION - Xcel Energy
3) Install an Xcel Energy-approved meter socket – In most cases it will be necessary to hire a licensed electrician to upgrade and or convert the meter socket to accept an underground service Your electrician has or can obtain Xcel Energy information on which meter sockets are approved Minimum clearances for outside gas
|
|