|
- How to unflash a sd card - balenaEtcher - balenaForums
Hi for a project i used etcher to flash a 2GB file into a 8GB sdcard now my sd card is ±50MB and i want my sdcard to return into 8GB Can you help me? PS:sorry if my english is bad i’m belgium
- Launching belanaDash on a non-standard TFT screen (some success)
Hello Gurus, I bought a cheap TFT 480x320 touchscreen from eBay advertised for use with Raspberry Pi 4 Understanding that there are some challenges there, I did make great progress and I’ll cover that Challenge: I can’t seem to get past the balena logo being shown on the screen to show a web page specified in LAUNCH_URL environment variable The logs say it’s showing, it’s just
- Supervisor stuck in restart loop - Product support - balenaForums
A few hours ago the supervisor running on one of our devices started restarting endlessly I’ve attached the logs below but they dont seem particularly relevant, save for the “Received SIGTERM Exiting ” at the end Currently the system is up and operating from a user-perspective, but I’m nervous to do anything to fix the supervisor that might affect the users There is a window later
- BalenaEtcher support BTRFS - balenaEtcher - balenaForums
Does BalenaEtcher support clones with BTRFS linux format support without removing grub?
- U-boot ERROR: cant get kernel image! - balenaForums
I tried to cleanup and rebuild the kernel and then replace uImage in resin-boot img : DEVELOPMENT_IMAGE=1 MACHINE=qsmp1570-qsbase1 bitbake -c cleansstate virtual kernel DEVELOPMENT_IMAGE=1 MACHINE=qsmp1570-qsbase1 bitbake virtual kernel The kernel boot and stop where it need root partiton So I guess the kernel is working but it is missing some balena code The size of uImage is smaller When
- Modem Manager GPS issue - Product support - balenaForums
Product support RDB January 23, 2018, 10:55am 1 Hi All, I have a m-PCI-E modem type: Simcom 7100E working with modem manger in Resin Host OS
- Jetson orin nano eMMC : UART dev ttyTHS1 not working
Hello, I can’t use the UART dev ttyTHS1 correctly I tried with a GPS or a Bluetooth over UART Everything is working as expected when I don’t use a balena based Host but doesn’t work with Balena I talk about using pin 8 and 10 I know there is this link Jetson Nano UART ( dev ttyTHS1) not working but it doesn’t provide any solution I use OS version 6 4 0 For example, with Bluetooth
- Balena Dash Project Wont Display - balenaForums
I’m going through this tutorial to set up a digital picture frame, and I feel like I’ve gone through all the steps correctly, but my Raspberry Pi will only display the Balena logo and nothing else I’m using a Raspberry Pi Zero W and Win 10 if that helps, and I’m just using the standard Command Prompt there I’ve already set up the device and connected it to my project, which it
|
|
|