|
Canada-0-Fireproofing 公司名錄
|
公司新聞:
- eCFR :: 40 CFR 761. 61 -- PCB remediation waste.
§ 761 61 PCB remediation waste This section provides cleanup and disposal options for PCB remediation waste Any person cleaning up and disposing of PCBs managed under this section shall do so based on the concentration at which the PCBs are found
- Fact Sheet: Performance-Based Cleanup and Disposal Under Section 761. 61 . . .
Any person may clean up and dispose of PCB remediation waste at a site in full compliance with the performance-based cleanup provisions of Section 761 61 (b) (1) and disposal provisions of Section 761 61 (b) (2)
- EPA Makes Long-Awaited Changes to PCB Clean-up Rules - GZA
Now, the regulated community is allowed to dispose of PCB Remediation Waste in certain Subtitle C facilities (as long as certain conditions are met), which should significantly reduce transportation and disposal costs
- 40 CFR part 761 - reginfo. gov
It is the mechanism under TSCA for accomplishing review, coordination, and approval of PCB waste management activities which are conducted outside of the TSCA PCB approval process, but require approval under the TSCA PCB regulations at 40 CFR part 761
- eCFR :: 40 CFR 761. 62 -- Disposal of PCB bulk product waste.
PCB bulk product waste shall be disposed of in accordance with paragraph (a), (b), or (c) of this section Under some of these provisions, it may not be necessary to determine the PCB concentration or leaching characteristics of the PCB bulk product waste
- Steps to Safe PCB Abatement Activities - US EPA
PCB bulk product waste must be handled in accordance with 40 CFR section 761 62, while PCB remediation waste must be handled in accordance with 40 CFR section 761 61
- eCFR :: 40 CFR Part 761 Subpart D -- Storage and Disposal
Disposal of the PCB remediation waste must comply with § 761 61 However, cleanup of those wastes that is not in complete compliance with § 761 61 will not afford the responsible party with relief from the applicable PCB regulations for that waste
- 40 CFR Part 761 Subpart R -- Sampling Non-Liquid, Non-Metal PCB Bulk . . .
PCB bulk product waste and PCB remediation waste destined for off-site disposal must be in the form of either flattened or roughly conical piles This subpart also contains a procedure for contemporaneous sampling of waste as it is being generated
- 40 CFR § 761. 62 - Disposal of PCB bulk product waste.
§ 761 62 Disposal of PCB bulk product waste PCB bulk product waste shall be disposed of in accordance with paragraph (a), (b), or (c) of this section Under some of these provisions, it may not be necessary to determine the PCB concentration or leaching characteristics of the PCB bulk product waste
- Managing Remediation Waste from Polychlorinated Biphenyls (PCBs . . .
The provisions in section 761 61 (b) (1) allow you to clean up PCB remediation waste in full compliance with that paragraph without an EPA approval or submission to EPA of a pre-cleanup notification and certification
|
|