|
Canada-0-LOGISTICS 公司名錄
|
公司新聞:
- sd card - SDMMC not working on STM32H7 uControllers - Stack Overflow
Good day The problem I am trying to get an SD card working using an STM32H7 uController I have in the past successfully integrated SDIO with STM32F4 F7 microcontroller but cannot get it to work on
- embedded - Initializing SD card in SPI issues - Stack Overflow
SD cards that cannot perform data transfers in the specified range must discard themselves from further bus operations and go into Inactive State2 By omitting the voltage range in the command, the host can query each card and determine if there are any incompatibilities before sending out-of-range cards into an inactive state "
- Waveshare ESP32-S3 7 LCD — SD Card + LVGL = Broken
I'm using the Waveshare ESP32-S3 7 quot; LCD with GT911 touch and a built-in SPI SD card The kit has fixed wiring for the display, touch, and SD, so I can't change the pin mapping Here's the issu
- How to create directory automatically on SD card - Stack Overflow
How to create directory automatically on SD card Asked 16 years, 2 months ago Modified 8 years, 8 months ago Viewed 276k times
- Reading boot sector and BPB structure of FAT32 SD Card
I am currently attempting to create my own SD Card reader I have the SD card commands and protocol fully implemented and working giving me usefull and accurate data about my SDCard ---CARD INFO---
- How to add SD driver on KC-705 from Xilinx in Vivado BD
When I trying to add ip core for sd card in vivado block design, it write errors while generating bitstream Errors is quot;Unspecified I O Standard quot; and quot;Unconstrained Logical Port quot
- how to make u-boot to load rootfs from 2nd partition of sd card?
I am trying to make u-boot to load rootfs from sd cards second partition while loading kernel and device tree from the first partition Has anyone faced this situation before? I've set the bootargs
- U-Boot: how to load U-Boot from SD card, but have it load its . . .
"load from an SD card, but access its Environment from QSPI Flash" -- U-Boot, like like most other programs, is oblivious to the medium that it was booted from The environment's location is configured into U-Boot So yes, that is possible to do; it's just unconventional "Currently, I have a U-Boot image running from QSPI Flash" -- In theory this same image should be bootable if stored on a
- beagleboneblack - How to write new MLO and u-boot. img to an SD card . . .
The SD card with the Debian image that you have stores the MLO and u-boot img as raw sectors (i e note that the FAT filesystem starts at sector 2049, offset 0x100000, so there are unallocated sectors preceding that first partition) [Note that sector numbering starts with 1, not 0 ] The existing MLO on your SD card is stored at sector 257 (offset 0x20000 or 128K) which includes a sector for
- STM32F746 - SD Card CRC failing in 4-bit mode, but working fine in 1 . . .
Summary It appears that with some cards, even at lower clock speeds, IO errors are incredibly common in SD 4-bit mode only At higher clock speeds, all cards I'm able to test with start having IO errors in 4-bit mode In SD 1-bit mode, however, even at the maximum clock speed I'm able to read and write fine I'd like to take advantage of the 4-bit mode for faster speeds What am I doing wrong
|
|