|
Canada-0-LinensRetail 公司名錄
|
公司新聞:
- Kyocera TA-8001i scan to smb error 2101 - Copytechnet. com
Since enabling the SMB 1 allows the scan, I would check the security settings for the user! Using the advance sharing is the way to go but have found in a number of instances with Win 10 that it does not provide the proper security access to the folder that is being scanned to Manually adding the user to the security setting with full control has resolved our issues
- Error code s03-2011 - Copytechnet. com
Technical support for Risograph, Duplo, Gestetner and other digital duplicators
- ERROR CC-164 - Copytechnet. com
Re: ERROR CC-164 Cant find that code in service manual Sent from my SM-G955F using Tapatalk
- HP LaserJet 4200n Error 13. 01. 00 PAPER FEED 1, PAPER LATE JAM
Sticky solenoids are very common on printers of this age Inspecting and re-padding mainly the tray 2 solenoid is part of maintenance now It's not often we look at the tray 1 solenoid Tray 1 isn't used as often, but, still degrades just like the tray 2 one does The tray 1 solenoid only does anything if using the tray 1 to print from
- ERROR CODE 49. 23. CB - Copytechnet. com
If this is your first visit, be sure to check out the FAQ by clicking the link above You may have to register before you can post: click the register link above to proceed To start viewing messages, select the forum that you want to visit from the selection below
- bizhub 350 error 5352 - Copytechnet. com
If this is your first visit, be sure to check out the FAQ by clicking the link above You may have to register before you can post: click the register link above to proceed To start viewing messages, select the forum that you want to visit from the selection below
- MPC2003 SC272 - Copytechnet. com
Re: MPC2003 SC272 Hi Have had 2 of these so far It turns out that the laser unit loom connecting the ld units to the machine are bum We removed them, flexed them a bit and re-installed them, and all was well afterward Pity that one cannot order the loom only as there is no part number they were also new (out of the box!)
- Riso Riso FR3950 ep-a - Copytechnet. com
Re: Riso Riso FR3950 ep-a Like IT responded, your older FR cannot quite understand the newer print interpolation An older RIP, like the SC3500 would probably produce great results when teamed up with a PC running Win95, but because of advancements in technology, the older machine can only guess at what the end result should look like now Kinda like a font substitution thing, it will try it's
- bizhub C450 - strange printing issues - Copytechnet. com
Re: bizhub C450 - strange printing issues I have only just recently been looking at what sounds to be very similar issues on another machine, but all the problems seem to rise from Adobe Funny duplexing, postage stamp sized print and other funny things It has been a long time since I worked on a Fiery connected to a C450, but here are the things that I would be looking at 1 Try "Print as
- Mp C4504 Control Panal message - Copytechnet. com
Re: Mp C4504 Control Panal message You can reset the home screen by pressing the button to the right of the home button and selecting reset home screen You can also initialise screen feature settings in screen feature settings > screen device settings You will also have to login first to do this as the device is locked down
|
|