|
Canada-0-MATTRESSES 公司名錄
|
公司新聞:
- Brightside®
Brightside Polyurethane contains a fluoro microadditive which makes it easier to clean and better able to resist staining, chemicals dirt The fluoro microadditive also increases the abrasion resistance of Brightside Polyurethane
- How do you spray 1-part paints such as Interlux Brightside, TotalBoat . . .
Type of spray application, nozzle or tip size, pressure, proper thinning, and technique are the fundamentals behind spraying 1-part paints such as TotalBoat Wet Edge, Interlux Brightside, Pettit EZ-Poxy, or Epifanes Monourethane paint
- Paint Guides | Interlux
Simply tell us a little about your boat and your job and we'll create a custom guide for you It'll give you clear step-by-step instructions, suggested methods, even pro tips and tricks Everything you need to make it a job well done I am going to work on a surface We're ready to help Our friendly help desk is open weekdays 8:00 - 16:30
- Any Advice for Spray Painting Interlux Brightside Polyurethane Enamel . . .
I have used Interlux Brightside many times but have always applied it with a foam roller Using a foam roller and a disposable foam brush to tip out the marks and little irregularities that the roller leaves can actually give you a finish that looks sprayed on
- How to Paint Your Boat with Interlux Brightside: Part 1 - YouTube
In this episode, I will give the deck one last look over and clean up any cosmetic things I missed Then I completely wipe down the deck with acetone to prep for the primer Then I lay down 2 coats
- Brightside - Binnacle
Method Apply 2-3 coats of Brightside following the proper dry times Sand between coats using 220-320 grade (grit) paper Remove sanding residue with a rag dampened with Brushing Liquid 333 Brightside may be applied by roller and brush using the roll and tip method
- Brightside® Polyurethane
Brightside® may be applied by roller and brush using the roll and tip method Brightside® Polyurethane may also be applied by spray
- Interlux Brightside Application Instructions - terhititoo
application method using Interlux Brightside (1 part) or Perfection or Awlgrip The roll and tip method works very well if you follow the instructions and take Brightside® Polyurethane is a hard, high gloss one-part polyurethane topside finish
- Paint prep for Interlux Brightside - Dedicated To The Smallest Of Skiffs
Clean the surface with the recommended solvent and sand with 220 grit Roll and tip is far more effective in terms of paint consumption, and requires minimal masking and none of the respirators and gear necessary for spraying If done right Brightside will give a very nice, long lasting finish
- INTERLUX Brightside® One-Part Polyurethane Paint - West Marine
It is easy to apply and has a self-leveling formula that with the right technique (roll and tip) renders results that approximate the “sprayed-on” look of two-part finishes Brightside contains fluoro-micro additives which resist staining, add to abrasion resistance and make it easy to clean
|
|